Continental__CombineMaster__OnHarvester-moving-dirty__2019

Continental expands CombineMaster Series

  • Combine harvester tire CombineMaster now available in VF version
  • Ten new sizes extend the range


Hanover, July 21, 2020. The first combine harvesters have started the 2020 harvest. While many farmers are currently collecting grains at full speed, the corn crop is not due until the end of the summer. Just in time for the start of this year's harvest season, Continental has further expanded its tire portfolio in the agricultural sector. Following the successful launch of the first size of the CombineMaster in 2019, ten more sizes of the agricultural tire will be launched this year and at the beginning of next year - including, for the first time, a VF version with innovative VF technology. The first VF Combine Master in the size 500/85R24 is available since July and will reliably accompany farmers through this year's harvest.

Both versions of the CombineMaster convince with patented N.flex technology and innovative d.fine lug technology. The combination provides very good flexibility with low vibration on the carcass and high resistance to wear and tear.


CombineMaster and VF CombineMaster: Reliable partners in the field

The CombineMaster offers exceptionally high core strength due to the HexaBead core technology. Due to the hexagonal core, the carcass material can wrap itself around the core better and thus improves the power transmission. The HexaCore design also ensures maximum load capacity of the carcass. The technology is specially developed for combine front tires and ensures high torque from rim to tire.

The VF CombineMaster equipped with VF technology is an ideal partner for farmers both in the field and on the road. The VF technology allows the tire to be used with reduced air pressure - this protects both the tire and the soil. In addition, the rectangular core of the tire ensures high deflection of the sidewall.

Continental extends size portfolio of the Combine Masters and VF Combine Masters in 2020

Full flexibility thanks to VF technology

The use on combine harvesters places very special demands on the tires. During harvesting operations, they have to withstand both cyclical loads in the field and high speeds on the road. While the counterweight of the cutter bar provides relief for the tires in the field, they are confronted with significantly higher weight on asphalt. VF tires enable farmers to save time and fuel, as well as avoid damaging soil compaction. Whereas previously it was necessary to adjust the tire pressure to the various work steps, VF technology allows the tire to be used at lower air pressure. This means that the tire can be driven without the need to adjust the air pressure to the weight of the load and the ground without any adverse effects. In this way, VF tires provide a constant load capacity at all speeds and, compared to standard tires, allow a reduction in tire pressure without compromising performance.

Continental tires will be available in the following sizes:

CombineMaster:

  • 0620224 650/75R32 CHO 172A8/172B Co/M
  • 0620225 680/85R32 CHO 179A8/179B Co/M
  • 0620226 800/70R32 CHO 181A8/181B Co/M
  • 0620229 900/60R32 CHO 181A8/181B Co/M
  • 0620230 900/60R38 CHO 181A8/181B Co/M

VF CombineMaster:  

  • 0620231 VF 500/85R24 CFO 167A8/B Co/M
  • 0620232 VF 500/85R30 CFO 170A8/B Co/M
  • 0620233 VF 600/65R28 CFO 163A8/B Co/M
  • 0620237 VF 620/70R26 CFO 173A8/B Co/M
  • 0620238 VF 750/65R26 CFO 177A8/B Co/M

Contact

Anika Hannig

Anika Hannig Spokeswoman Commercial Specialty Tires Phone: +49 511 938-2533 Fax: +49 511 938-2570 E-mail: