Suggestions
    Go directly to
      Press Release
      May 26, 2020

      A pioneer in automobile electronics

      • Czech plant with 3,000 employees produces almost 70 million high-tech products annually for major car manufacturer

      • Wide range of sensors and control units – also for electrified drives

      • Industry 4.0 pioneer with highly automated production

       

      Frenštát pod Radhoštěm (Czech Republic), Regensburg, May 26, 2020. An anniversary in a scenic setting: in Frenštát pod Radhoštěm at the foot of the Beskid Mountains, the Vitesco Technologies site is celebrating its 25th anniversary. In May 1995, the site started producing electronic components for the automotive industry, initially with 100 employees. Today, the Czech site with its workforce of approximately 3,000 is one of the largest employers in the region and is also one of the largest electronics plants owned by Vitesco Technologies, the Powertrain Technologies group sector of Continental, which has been operating as an independent company under its new name since October 2019 and is pursuing a sustainable strategy focused on electrified powertrains.

      The Frenštát site is part of the production network of Vitesco Technologies. "Our goal is to be competitive for our customers worldwide and to deliver state-of-the-art technology locally on the same standards and quality. With Frenštát, we have a location that operates at a very high level of technology and quality," says Dr. Jürgen Braun, head of Operations at Vitesco Technologies.

      In Frenštát, the company produces a wide range of sensors and electronic controls: from temperature, level and door handle sensors to intelligent battery sensors, from engine and exhaust aftertreatment control units to the Central Powertrain Controller (CPC) for electrified drives. In 2019, 68 million units of almost 2,000 different products were manufactured here. The plant's largest customers include Daimler, Ford, Volkswagen, General Motors and BMW.

      The plant has a high degree of automation and works with the most modern production methods. Within Vitesco Technologies it is, for example, the competence center for surface-mount technology (SMT). This innovative process, with which surface-mounted devices can be soldered directly onto the circuit board in a fully automated process, enables very dense and double-sided assembly of circuit boards, resulting in significantly smaller and more cost-effective products.

      “Our site has continuously developed its competencies over the past 25 years. With this anniversary, we are also celebrating the strong position that we have achieved through great efforts and continuous improvements, and of which our entire workforce can be very proud”, says plant manager Knut Staade. The automotive industry is undergoing fundamental change, and one of the key challenges is the transition to electric drive systems. “Vitesco Technologies has set itself the goal of becoming a leading supplier in the field of electric mobility. Our location will make an active contribution to this.”

      As early as 1995, the site founded by Siemens was characterized by modern manufacturing technologies and considerable automation. The company reported highly dynamic growth: after initially starting with 100 employees, five years later the workforce numbered 900, and by 2008, when the global financial and economic crisis started, it had grown to 2,800 employees.

      Frenštát had become a Continental site when Siemens VDO was taken over by Continental in 2007, and the Czech location also developed a strong position in the global network of this world-leading automotive supplier. As production expanded, the technological range also grew. The plant has experts in a wide range of fields: from plastics processing, testing procedures and automation to robotics. In 2015, the site began to create the conditions for the transition to Industry 4.0 through increased digitalization. Frenštát became a pioneer of Industry 4.0 in this region and started using collaborating robots as early as January 2016.

      The site is not only important for the region as an employer, it is also socially involved and amongst other things supports local sports clubs, schools, cultural events and environmental activities in the Beskid Mountains.

      The central topic at the site at present is, of course, the corona pandemic, which has hit the automotive industry hard. “The health of our employees has top priority for us”, says Knut Staade. “At the same time, we are making every effort to meet the needs of our customers.”

      The big anniversary celebration for employees and the general public that had been planned to mark the 25th anniversary has been postponed until May 2021 due to the pandemic.

      Milestones of the Frenštát pod Radhoštěm site

      1995
      Launched as a Siemens automotive electronics plant
      1996
      Relocation of the production to a newly constructed, company-owned building
      2003
      Start of sensor production
      2004
      A new logistics center is opened
      2007Continental takes over Siemens VDO, Frenštát becomes Continental location
      2015
      Increased digitization as part of the transition to Industry 4.0
      2016
      Use of first cooperating robots (Cobots)
      2019
      Frenštát becomes part of Vitesco Technologies, the Powertrain Technologies group sector of Continental

      Available documents

      Cookie Policy

      We use cookies to provide you with the best experience on our website. Click on "Accept all" to allow all cookies or "Change cookie settings" to decide individually.

      Note: If you consent to the use of performance cookies, you also consent to the transfer of your personal data to insecure third countries (e.g. to the USA). These insecure third countries do not provide a level of data protection comparable to EU standards. In the case of certain third party providers, such as Google and Mouseflow, no other guarantees are offered to compensate for this deficit. There is therefore a risk that the transmission of your personal data may result in state authorities accessing your personal data without you having effective legal protection options.

      For more information on performance technologies and the transfer of data to third countries, please refer to the privacy policy.

      By clicking the "Accept all" button, you explicitly consent to this. Consent can be revoked at any time by changing the cookie settings. The further processing of data already collected before revocation by the third-party provider cannot be excluded.

      A cookie is a small data file that is stored on your device. We use cookies to provide basic and convenience functionalities, measure website performance and analyze user behavior on the website. 

      Required cookies are always activated because they are indispensable for the operation of the website and to store your cookie consent. Functional and performance cookies are optional. All optional cookies are deactivated by default.

      You can change your cookie settings at any time by visiting our Cookie Policy or by clearing the cache in your browser. 

      Show more Show less
      Back
      Required cookies Required

      These cookies are required to provide you with key functions.

      Functional cookies

      These cookies are used to provide certain functionalities to you.

      Performance cookies

      These cookies are used to measure website performance and user behavior. All collected data are analyzed anonymously.